Export limit exceeded: 75939 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (75939 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23089 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() When snd_usb_create_mixer() fails, snd_usb_mixer_free() frees mixer->id_elems but the controls already added to the card still reference the freed memory. Later when snd_card_register() runs, the OSS mixer layer calls their callbacks and hits a use-after-free read. Call trace: get_ctl_value+0x63f/0x820 sound/usb/mixer.c:411 get_min_max_with_quirks.isra.0+0x240/0x1f40 sound/usb/mixer.c:1241 mixer_ctl_feature_info+0x26b/0x490 sound/usb/mixer.c:1381 snd_mixer_oss_build_test+0x174/0x3a0 sound/core/oss/mixer_oss.c:887 ... snd_card_register+0x4ed/0x6d0 sound/core/init.c:923 usb_audio_probe+0x5ef/0x2a90 sound/usb/card.c:1025 Fix by calling snd_ctl_remove() for all mixer controls before freeing id_elems. We save the next pointer first because snd_ctl_remove() frees the current element. | ||||
| CVE-2026-23102 | 1 Linux | 1 Linux Kernel | 2026-04-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64/fpsimd: signal: Fix restoration of SVE context When SME is supported, Restoring SVE signal context can go wrong in a few ways, including placing the task into an invalid state where the kernel may read from out-of-bounds memory (and may potentially take a fatal fault) and/or may kill the task with a SIGKILL. (1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into an invalid state where SVCR.SM is set (and sve_state is non-NULL) but TIF_SME is clear, consequently resuting in out-of-bounds memory reads and/or killing the task with SIGKILL. This can only occur in unusual (but legitimate) cases where the SVE signal context has either been modified by userspace or was saved in the context of another task (e.g. as with CRIU), as otherwise the presence of an SVE signal context with SVE_SIG_FLAG_SM implies that TIF_SME is already set. While in this state, task_fpsimd_load() will NOT configure SMCR_ELx (leaving some arbitrary value configured in hardware) before restoring SVCR and attempting to restore the streaming mode SVE registers from memory via sve_load_state(). As the value of SMCR_ELx.LEN may be larger than the task's streaming SVE vector length, this may read memory outside of the task's allocated sve_state, reading unrelated data and/or triggering a fault. While this can result in secrets being loaded into streaming SVE registers, these values are never exposed. As TIF_SME is clear, fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0 accesses to streaming mode SVE registers, so these cannot be accessed directly at EL0. As fpsimd_save_user_state() verifies the live vector length before saving (S)SVE state to memory, no secret values can be saved back to memory (and hence cannot be observed via ptrace, signals, etc). When the live vector length doesn't match the expected vector length for the task, fpsimd_save_user_state() will send a fatal SIGKILL signal to the task. Hence the task may be killed after executing userspace for some period of time. (2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the task's SVCR.SM. If SVCR.SM was set prior to restoring the context, then the task will be left in streaming mode unexpectedly, and some register state will be combined inconsistently, though the task will be left in legitimate state from the kernel's PoV. This can only occur in unusual (but legitimate) cases where ptrace has been used to set SVCR.SM after entry to the sigreturn syscall, as syscall entry clears SVCR.SM. In these cases, the the provided SVE register data will be loaded into the task's sve_state using the non-streaming SVE vector length and the FPSIMD registers will be merged into this using the streaming SVE vector length. Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires ensuring that the task's sme_state has been allocated, but as this could contain live ZA state, it should not be zeroed. Fix (2) by clearing SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear. For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME, and fp_type earlier, immediately after the allocation of sve_state/sme_state, before the restore of the actual register state. This makes it easier to ensure that these are always modified consistently, even if a fault is taken while reading the register data from the signal context. I do not expect any software to depend on the exact state restored when a fault is taken while reading the context. | ||||
| CVE-2026-21626 | 2 Joomla, Stackideas | 3 Joomla, Joomla!, Easydiscuss | 2026-04-18 | 7.5 High |
| Access control settings for forum post custom fields are not applied to the JSON output type, leading to an ACL violation vector an information disclosure | ||||
| CVE-2026-2013 | 1 Itsourcecode | 2 School Management System, Student Management System | 2026-04-18 | 7.3 High |
| A vulnerability was identified in itsourcecode Student Management System 1.0. This affects an unknown function of the file /ramonsys/soa/index.php. Such manipulation of the argument ID leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-25636 | 2 Calibre-ebook, Kovidgoyal | 2 Calibre, Calibre | 2026-04-18 | 8.2 High |
| calibre is an e-book manager. In 9.1.0 and earlier, a path traversal vulnerability in Calibre's EPUB conversion allows a malicious EPUB file to corrupt arbitrary existing files writable by the Calibre process. During conversion, Calibre resolves CipherReference URI from META-INF/encryption.xml to an absolute filesystem path and opens it in read-write mode, even when it points outside the conversion extraction directory. This vulnerability is fixed in 9.2.0. | ||||
| CVE-2026-2066 | 1 Utt | 2 520w, 520w Firmware | 2026-04-18 | 8.8 High |
| A weakness has been identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formIpGroupConfig. Executing a manipulation of the argument groupName can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-2067 | 1 Utt | 2 520w, 520w Firmware | 2026-04-18 | 8.8 High |
| A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTimeGroupConfig. The manipulation of the argument year1 leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-2070 | 1 Utt | 2 520w, 520w Firmware | 2026-04-18 | 8.8 High |
| A vulnerability has been found in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/formPolicyRouteConf. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-2136 | 1 Projectworlds | 1 Online Food Ordering System | 2026-04-18 | 7.3 High |
| A flaw has been found in projectworlds Online Food Ordering System 1.0. This affects an unknown function of the file /view-ticket.php. Executing a manipulation of the argument ID can lead to sql injection. It is possible to launch the attack remotely. The exploit has been published and may be used. | ||||
| CVE-2026-2157 | 2 D-link, Dlink | 3 Dir-823x, Dir-823x, Dir-823x Firmware | 2026-04-18 | 7.2 High |
| A security vulnerability has been detected in D-Link DIR-823X 250416. This affects the function sub_4175CC of the file /goform/set_static_route_table. Such manipulation of the argument interface/destip/netmask/gateway/metric leads to os command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2026-2185 | 1 Tenda | 2 Rx3, Rx3 Firmware | 2026-04-18 | 8.8 High |
| A flaw has been found in Tenda RX3 16.03.13.11. This issue affects the function set_device_name of the file /goform/setBlackRule of the component MAC Filtering Configuration Endpoint. This manipulation of the argument devName/mac causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. | ||||
| CVE-2026-24676 | 1 Freerdp | 1 Freerdp | 2026-04-18 | 7.5 High |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.22.0, AUDIN format renegotiation frees the active format list while the capture thread continues using audin->format, leading to a use after free in audio_format_compatible. This vulnerability is fixed in 3.22.0. | ||||
| CVE-2026-24680 | 1 Freerdp | 1 Freerdp | 2026-04-18 | 7.5 High |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.22.0, sdl_Pointer_New frees data on failure, then pointer_free calls sdl_Pointer_Free and frees it again, triggering ASan UAF. This vulnerability is fixed in 3.22.0. | ||||
| CVE-2026-1529 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-04-18 | 8.1 High |
| A flaw was found in Keycloak. An attacker can exploit this vulnerability by modifying the organization ID and target email within a legitimate invitation token's JSON Web Token (JWT) payload. This lack of cryptographic signature verification allows the attacker to successfully self-register into an unauthorized organization, leading to unauthorized access. | ||||
| CVE-2026-25478 | 2 Litestar, Litestar-org | 2 Litestar, Litestar | 2026-04-18 | 7.4 High |
| Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to 2.20.0, CORSConfig.allowed_origins_regex is constructed using a regex built from configured allowlist values and used with fullmatch() for validation. Because metacharacters are not escaped, a malicious origin can match unexpectedly. The check relies on allowed_origins_regex.fullmatch(origin). This vulnerability is fixed in 2.20.0. | ||||
| CVE-2026-25497 | 1 Craftcms | 2 Craft Cms, Craftcms | 2026-04-18 | 8.8 High |
| Craft is a platform for creating digital experiences. In Craft versions from 4.0.0-RC1 to before 4.17.0-beta.1 and 5.9.0-beta.1, there is a Privilege Escalation vulnerability in Craft CMS’s GraphQL API that allows an authenticated user with write access to one asset volume to escalate their privileges and modify/transfer assets belonging to any other volume, including restricted or private volumes to which they should not have access. The saveAsset GraphQL mutation validates authorization against the schema-resolved volume but fetches the target asset by ID without verifying that the asset belongs to the authorized volume. This allows unauthorized cross-volume asset modification and transfer. This vulnerability is fixed in 4.17.0-beta.1 and 5.9.0-beta.1. | ||||
| CVE-2026-21322 | 3 Adobe, Apple, Microsoft | 3 After Effects, Macos, Windows | 2026-04-18 | 7.8 High |
| After Effects versions 25.6 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-21346 | 3 Adobe, Apple, Microsoft | 3 Bridge, Macos, Windows | 2026-04-18 | 7.8 High |
| Bridge versions 15.1.3, 16.0.1 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-25506 | 3 Debian, Dun, Opensuse | 3 Debian Linux, Munge, Munge | 2026-04-18 | 7.7 High |
| MUNGE is an authentication service for creating and validating user credentials. From 0.5 to 0.5.17, local attacker can exploit a buffer overflow vulnerability in munged (the MUNGE authentication daemon) to leak cryptographic key material from process memory. With the leaked key material, the attacker could forge arbitrary MUNGE credentials to impersonate any user (including root) to services that rely on MUNGE for authentication. The vulnerability allows a buffer overflow by sending a crafted message with an oversized address length field, corrupting munged's internal state and enabling extraction of the MAC subkey used for credential verification. This vulnerability is fixed in 0.5.18. | ||||
| CVE-2026-2313 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-04-18 | 8.8 High |
| Use after free in CSS in Google Chrome prior to 145.0.7632.45 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||