| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| QGIS is a free, open source, cross platform geographical information system (GIS) The repository contains a GitHub Actions workflow called "pre-commit checks" that, before commit 76a693cd91650f9b4e83edac525e5e4f90d954e9, was vulnerable to remote code execution and repository compromise because it used the `pull_request_target` trigger and then checked out and executed untrusted pull request code in a privileged context. Workflows triggered by `pull_request_target` ran with the base repository's credentials and access to secrets. If these workflows then checked out and executed code from the head of an external pull request (which could have been attacker controlled), the attacker could have executed arbitrary commands with elevated privileges. This insecure pattern has been documented as a security risk by GitHub and security researchers. Commit 76a693cd91650f9b4e83edac525e5e4f90d954e9 removed the vulnerable code. |
| Kargo manages and automates the promotion of software artifacts. Prior to versions 1.8.7, 1.7.7, and 1.6.3, a bug was found with authentication checks on the `GetConfig()` API endpoint. This allowed unauthenticated users to access this endpoint by specifying an `Authorization` header with any non-empty `Bearer` token value, regardless of validity. This vulnerability did allow for exfiltration of configuration data such as endpoints for connected Argo CD clusters. This data could allow an attacker to enumerate cluster URLs and namespaces for use in subsequent attacks. Additionally, the same bug affected the `RefreshResource` endpoint. This endpoint does not lead to any information disclosure, but could be used by an unauthenticated attacker to perform a denial-of-service style attack against the Kargo API. `RefreshResource` sets an annotation on specific Kubernetes resources to trigger reconciliations. If run on a constant loop, this could also slow down legitimate requests to the Kubernetes API server. This problem has been patched in Kargo versiosn 1.8.7, 1.7.7, and 1.6.3. There are no workarounds for this issue. |
| A vulnerability was found in WeKan up to 8.20. Affected by this issue is some unknown functionality of the file server/methods/positionHistory.js of the component Position-History Tracking. The manipulation results in missing authorization. The attack may be performed from remote. Upgrading to version 8.21 can resolve this issue. The patch is identified as 55576ec17722db094835470b386162c9a662fb60. It is advisable to upgrade the affected component. |
| An improper authorization vulnerability in GitHub Trigger Comment Control in Google Cloud Build prior to 2026-1-26 allows a remote attacker to execute arbitrary code in the build environment.
This vulnerability was patched on 26 January 2026, and no customer action is needed. |
| OpenHarness before commit bd4df81 contains a permission bypass vulnerability that allows attackers to read sensitive files by exploiting incomplete path normalization in the permission checker. Attackers can invoke the built-in grep and glob tools with sensitive root directories that are not properly evaluated against configured path rules, allowing disclosure of sensitive local file content, key material, configuration files, or directory contents despite configured path restrictions. |
| The Auth0 Next.js SDK is a library for implementing user authentication in Next.js applications. In versions 4.12.0 through 4.17.1, simultaneous requests that trigger a nonce retry may cause the proxy cache fetcher to perform improper lookups for the token request results. Users are affected if their project uses both the vulnerable versions and the proxy handler /me/* and /my-org/* with DPoP enabled. This issue has been fixed in version 4.18.0. |
| zrok is software for sharing web services, files, and network resources. Prior to version 2.0.1, the unaccess handler (controller/unaccess.go) contains a logical error in its ownership guard: when a frontend record has environment_id = NULL (the marker for admin-created global frontends), the condition short-circuits to false and allows the deletion to proceed without any ownership verification. A non-admin user who knows a global frontend token can call DELETE /api/v2/unaccess with any of their own environment IDs and permanently delete the global frontend, taking down all public shares routed through it. Version 2.0.1 patches the issue. |
| OPEXUS eCASE Audit allows an authenticated attacker to modify client-side JavaScript or craft HTTP requests to access functions or buttons that have been disabled or blocked by an administrator. Fixed in eCASE Platform 11.14.1.0. |
| Dreamweaver Desktop versions 21.6 and earlier are affected by an Incorrect Authorization vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could leverage this vulnerability to bypass security measures and execute unauthorized code. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| EVerest is an EV charging software stack. In versions up to and including 2025.12.1, it is possible to bypass the sequence state verification including authentication, and send requests that transition to forbidden states relative to the current one, thereby updating the current context with illegitimate data.cThanks to the modular design of EVerest, authorization is handled in a separate module and EVSEManager Charger internal state machine cannot transition out of the `WaitingForAuthentication` state through ISO 15118-2 communication. From this state, it was however possible through ISO 15118-2 messages which are published to the MQTT server to trick it into preparing to charge, and even to prepare to send current. The final requirement to actually send current to the EV was the closure of the contactors, which does not appear to be possible without leaving the `WaitingForAuthentication` state and leveraging ISO 15118-2 messages. As of time of publication, no fixed versions are available. |
| Official Document Management System developed by 2100 Technology has a Incorrect Authorization vulnerability, allowing authenticated remote attackers to modify front-end code to read all official documents. |
| Due to inadequate access control, authenticated users of certain HIKSEMI NAS products can manipulate other users' file resources without proper authorization. |
| A security flaw has been discovered in Zhong Bang CRMEB up to 5.6.3. This vulnerability affects unknown code of the file crmeb/app/api/controller/v1/CrontabController.php of the component crontab Endpoint. The manipulation results in missing authorization. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| DeepAudit is a multi-agent system for code vulnerability discovery. In 3.0.4 and earlier, there is an improper access control vulnerability in the /api/v1/users/ endpoint allows any authenticated user to enumerate all users in the system and retrieve sensitive information including email addresses, phone numbers, full names, and role information. |
| A security vulnerability has been detected in WeKan up to 8.20. Impacted is an unknown function of the file server/publications/rules.js of the component Rules Handler. The manipulation leads to missing authorization. The attack can be initiated remotely. Upgrading to version 8.21 is recommended to address this issue. The identifier of the patch is a787bcddf33ca28afb13ff5ea9a4cb92dceac005. The affected component should be upgraded. |
| LavinMQ is a high-performance message queue & streaming server. Before 2.6.8, an authenticated user, with the “Policymaker” tag, could create shovels bypassing access controls. an authenticated user with the "Policymaker" management tag could exploit it to read messages from vhosts they are not authorized to access or publish messages to vhosts they are not authorized to access. This vulnerability is fixed in 2.6.8. |
| Gogs is an open source self-hosted Git service. Versions 0.13.4 and below have an access control bypass vulnerability which allows any repository collaborator with Write permissions to delete protected branches (including the default branch) by sending a direct POST request, completely bypassing the branch protection mechanism. This vulnerability in the DeleteBranchPost function eenables privilege escalation from Write to Admin level, allowing low-privilege users to perform dangerous operations that should be restricted to administrators only. Although Git Hook layer correctly prevents protected branch deletion via SSH push, the web interface deletion operation does not trigger Git Hooks, resulting in complete bypass of protection mechanisms. In oder to exploit this vulnerability, attackers must have write permissions to the target repository, protected branches configured to the target repository and access to the Gogs web interface. This issue has been fixed in version 0.14.1. |
| OpenClaw is a personal AI assistant. Prior to 2026.2.13, the optional BlueBubbles iMessage channel plugin could accept webhook requests as authenticated based only on the TCP peer address being loopback (`127.0.0.1`, `::1`, `::ffff:127.0.0.1`) even when the configured webhook secret was missing or incorrect. This does not affect the default iMessage integration unless BlueBubbles is installed and enabled. Version 2026.2.13 contains a patch. Other mitigations include setting a non-empty BlueBubbles webhook password and avoiding deployments where a public-facing reverse proxy forwards to a loopback-bound Gateway without strong upstream authentication. |
| OpenClaw is a personal AI assistant. Prior to version 2026.2.14, under iMessage `groupPolicy=allowlist`, group authorization could be satisfied by sender identities coming from the DM pairing store, broadening DM trust into group contexts. Version 2026.2.14 fixes the issue. |
| Kargo manages and automates the promotion of software artifacts. From 1.7.0 to before v1.7.8, v1.8.11, and v1.9.3, the batch resource creation endpoints of both Kargo's legacy gRPC API and newer REST API accept multi-document YAML payloads. Specially crafted payloads can manifest a bug present in the logic of both endpoints to inject arbitrary resources (of specific types only) into the underlying namespace of an existing Project using the API server's own permissions when that behavior was not intended. Critically, an attacker may exploit this as a vector for elevating their own permissions, which can then be leveraged to achieve remote code execution or secret exfiltration. Exfiltrated artifact repository credentials can be leveraged, in turn, to execute further attacks. In some configurations of the Kargo control plane's underlying Kubernetes cluster, elevated permissions may additionally be leveraged to achieve remote code execution or secret exfiltration using kubectl. This can reduce the complexity of the attack, however, worst case scenarios remain entirely achievable even without this. This vulnerability is fixed in v1.7.8, v1.8.11, and v1.9.3. |
