| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| Perl threads have a working directory race condition where file operations may target unintended paths.
If a directory handle is open at thread creation, the process-wide current working directory is temporarily changed in order to clone that handle for the new thread, which is visible from any third (or more) thread already running.
This may lead to unintended operations such as loading code or accessing files from unexpected locations, which a local attacker may be able to exploit.
The bug was introduced in commit 11a11ecf4bea72b17d250cfb43c897be1341861e and released in Perl version 5.13.6 |
| malcontent discovers supply-chain compromises through. context, differential analysis, and YARA. Starting in version 1.8.0 and prior to version 1.20.3, malcontent could be made to create symlinks outside the intended extraction directory when scanning a specially crafted tar or deb archive. The `handleSymlink` function received arguments in the wrong order, causing the symlink target to be used as the symlink location. Additionally, symlink targets were not validated to ensure they resolved within the extraction directory. Version 1.20.3 introduces fixes that swap handleSymlink arguments, validate symlink location, and validate symlink targets that resolve within an extraction directory. |
| Bytes is a utility library for working with bytes. From version 1.2.1 to before 1.11.1, Bytes is vulnerable to integer overflow in BytesMut::reserve. In the unique reclaim path of BytesMut::reserve, if the condition "v_capacity >= new_cap + offset" uses an unchecked addition. When new_cap + offset overflows usize in release builds, this condition may incorrectly pass, causing self.cap to be set to a value that exceeds the actual allocated capacity. Subsequent APIs such as spare_capacity_mut() then trust this corrupted cap value and may create out-of-bounds slices, leading to UB. This behavior is observable in release builds (integer overflow wraps), whereas debug builds panic due to overflow checks. This issue has been patched in version 1.11.1. |
| Out-of-bounds write vulnerability in the file system module.
Impact: Successful exploitation of this vulnerability may affect service confidentiality. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. In versions up to and including 2.3.1.4, signed integer overflow in iccFromCube.cpp during multiplication triggers undefined behavior, potentially causing crashes or incorrect ICC profile generation when processing crafted/large cube inputs. Commit 43ae18dd69fc70190d3632a18a3af2f3da1e052a fixes the issue. No known workarounds are available. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1 and below have overflows and underflows in CIccXmlArrayType::ParseTextCountNum(). This vulnerability affects users of the iccDEV library who process ICC color profiles. This issue is fixed in version 2.3.1.1. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a Type Confusion vulnerability in `SIccCalcOp::ArgsPushed()` at `IccProfLib/IccMpeCalc.cpp`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a Type Confusion vulnerability in `CIccSegmentedCurveXml::ToXml()` at `IccXML/IccLibXML/IccMpeXml.cpp`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| An Incorrect Calculation vulnerability in the Layer 2 Control
Protocol
Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage.
When the issue is seen, the following log message will be generated:
op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP,
This issue affects Junos OS Evolved:
* all versions before 21.4R3-S7-EVO,
* from 22.2 before 22.2R3-S4-EVO,
* from 22.3 before 22.3R3-S3-EVO,
* from 22.4 before 22.4R3-S2-EVO,
* from 23.2 before 23.2R2-S1-EVO,
* from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_gre: make ipgre_header() robust
Analog to commit db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust")
Over the years, syzbot found many ways to crash the kernel
in ipgre_header() [1].
This involves team or bonding drivers ability to dynamically
change their dev->needed_headroom and/or dev->hard_header_len
In this particular crash mld_newpack() allocated an skb
with a too small reserve/headroom, and by the time mld_sendpack()
was called, syzbot managed to attach an ipgre device.
[1]
skbuff: skb_under_panic: text:ffffffff89ea3cb7 len:2030915468 put:2030915372 head:ffff888058b43000 data:ffff887fdfa6e194 tail:0x120 end:0x6c0 dev:team0
kernel BUG at net/core/skbuff.c:213 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 1322 Comm: kworker/1:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic+0x157/0x160 net/core/skbuff.c:213
Call Trace:
<TASK>
skb_under_panic net/core/skbuff.c:223 [inline]
skb_push+0xc3/0xe0 net/core/skbuff.c:2641
ipgre_header+0x67/0x290 net/ipv4/ip_gre.c:897
dev_hard_header include/linux/netdevice.h:3436 [inline]
neigh_connected_output+0x286/0x460 net/core/neighbour.c:1618
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x340/0x550 net/ipv6/ip6_output.c:247
NF_HOOK+0x9e/0x380 include/linux/netfilter.h:318
mld_sendpack+0x8d4/0xe60 net/ipv6/mcast.c:1855
mld_send_cr net/ipv6/mcast.c:2154 [inline]
mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693
process_one_work kernel/workqueue.c:3257 [inline]
process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340
worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421
kthread+0x711/0x8a0 kernel/kthread.c:463
ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Versions prior to 2.3.1.2 have an undefined behavior issue when floating-point NaN values are converted to unsigned short integer types during ICC profile XML parsing potentially corrupting memory structures and enabling arbitrary code execution. This vulnerability affects users of the iccDEV library who process ICC color profiles. ICC Profile Injection vulnerabilities arise when user-controllable input is incorporated into ICC profile data or other structured binary blobs in an unsafe manner. Version 2.3.1.2 contains a fix for the issue. No known workarounds are available. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to 2.3.1.4, SrcPixel and DestPixel stack buffers overlap in CIccTagMultiProcessElement::Apply() int IccTagMPE.cpp. This vulnerability is fixed in 2.3.1.4. |
| SPIP 4.4.10 through 4.4.12 before 4.4.13 allows unintended privilege assignment (of administrator privileges) during the editing of an author data structure because of STATUT mishandling. |
| A Function Call With Incorrect Argument Type vulnerability in the sensor interface of Juniper Networks Junos OS Evolved on PTX Series allows a network-based, authenticated attacker with low privileges to cause a complete Denial of Service (DoS).
If colored SRTE policy tunnels are provisioned via PCEP, and gRPC is used to monitor traffic in these tunnels, evo-aftmand crashes and doesn't restart which leads to a complete and persistent service impact. The system has to be manually restarted to recover. The issue is seen only when the Originator ASN field in PCEP contains a value larger than 65,535 (32-bit ASN). The issue is not reproducible when SRTE policy tunnels are statically configured.
This issue affects Junos OS Evolved on PTX Series:
* all versions before 22.4R3-S9-EVO,
* 23.2 versions before 23.2R2-S6-EVO,
* 23.4 versions before 23.4R2-S7-EVO,
* 24.2 versions before 24.2R2-S4-EVO,
* 24.4 versions before 24.4R2-S2-EVO,
* 25.2 versions before 25.2R1-S2-EVO, 25.2R2-EVO. |
| Integer size truncation in Windows Advanced Rasterization Platform (WARP) allows an unauthorized attacker to elevate privileges locally. |
| The CombinedMult function in the CIRCL ecc/p384 package (secp384r1 curve) produces an incorrect value for specific inputs. The issue is fixed by using complete addition formulas.
ECDH and ECDSA signing relying on this curve are not affected.
The bug was fixed in v1.6.3 https://github.com/cloudflare/circl/releases/tag/v1.6.3 . |
| Use of a Broken or Risky Cryptographic Algorithm vulnerability in rustdesk-server-pro RustDesk Server Pro rustdesk-server-pro on Windows, MacOS, Linux (Config string generation, web console export modules) allows Retrieve Embedded Sensitive Data. This vulnerability is associated with program routines Config export/generation routines.
This issue affects RustDesk Server Pro: through 1.7.5. |
