| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| fast-jwt provides fast JSON Web Token (JWT) implementation. Prior to 6.2.1, using certain modifiers on RegExp objects in the allowedAud, allowedIss, allowedSub, allowedJti, or allowedNonce options in verify functions can cause certain unintended behaviours. This is because some modifiers are stateful and will cause failures in every second verification attempt regardless of the validity of the token provided. Such modifiers are /g (global matching) and /y (sticky matching). This does NOT allow invalid tokens to be accepted, only for valid tokens to be improperly rejected in some configurations. Instead it causes 50% of valid authentication requests to fail in an alternating pattern. This vulnerability is fixed in 6.2.1. |
| The compiler is meant to unwrap pointers which are the operands of a memory move; a no-op interface conversion prevented the compiler from making the correct determination about non-overlapping moves, potentially leading to memory corruption at runtime. |
| A vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS filesystem integrity check and maintain limited persistence via a maliciously-crafted firmware update package.This issue affects Fireware OS 12.0 up to and including 12.11.7, 12.5.9 up to and including 12.5.16, and 2025.1 up to and including 2026.1.1. |
| When using http.CrossOriginProtection, the AddInsecureBypassPattern method can unexpectedly bypass more requests than intended. CrossOriginProtection then skips validation, but forwards the original request path, which may be served by a different handler without the intended security protections. |
| Backstage is an open framework for building developer portals. Configuration supplied through APP_CONFIG_* environment variables, for example APP_CONFIG_backend_listen_port=7007, where unexpectedly ignoring the visibility defined in configuration schema. This occurred even if the configuration schema specified that they should have backend or secret visibility. This was an intended feature of the APP_CONFIG_* way of supplying configuration, but now clearly goes against the expected behavior of the configuration system. This behavior leads to a risk of potentially exposing sensitive configuration details intended to remain private or restricted to backend processes. The issue has been resolved in version 0.3.75 of the @backstage/plugin-app-backend package. As a temporary measure, avoid supplying secrets using the APP_CONFIG_ configuration pattern. Consider alternative methods for setting secrets, such as the environment substitution available for Backstage configuration. |
| The “ipaddress” module contained incorrect information about whether certain IPv4 and IPv6 addresses were designated as “globally reachable” or “private”. This affected the is_private and is_global properties of the ipaddress.IPv4Address, ipaddress.IPv4Network, ipaddress.IPv6Address, and ipaddress.IPv6Network classes, where values wouldn’t be returned in accordance with the latest information from the IANA Special-Purpose Address Registries.
CPython 3.12.4 and 3.13.0a6 contain updated information from these registries and thus have the intended behavior. |
| Erlang/OTP is a set of libraries for the Erlang programming language. In versions prior to OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25), Erlang/OTP SSH fails to enforce strict KEX handshake hardening measures by allowing optional messages to be exchanged. This allows a Man-in-the-Middle attacker to inject these messages in a connection during the handshake. This issue has been patched in versions OTP-27.3.4 (for OTP-27), OTP-26.2.5.12 (for OTP-26), and OTP-25.3.2.21 (for OTP-25). |
| Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. |
| Failure to properly synchronize user's permissions in UAA in Cloud Foundry Foundation v40.17.0 https://github.com/cloudfoundry/cf-deployment/releases/tag/v40.17.0 ,
potentially resulting in users retaining access rights they should not
have. This can allow them to perform operations beyond their intended
permissions. |
| LLVM before 18.1.3 generates code in which the LR register can be overwritten without data being saved to the stack, and thus there can sometimes be an exploitable error in the flow of control. This affects the ARM backend and can be demonstrated with Clang. NOTE: the vendor perspective is "we don't have strong objections for a CVE to be created ... It does seem that the likelihood of this miscompile enabling an exploit remains very low, because the miscompile resulting in this JOP gadget is such that the function is most likely to crash on most valid inputs to the function. So, if this function is covered by any testing, the miscompile is most likely to be discovered before the binary is shipped to production." |
| A vulnerability has been identified in APOGEE PXC+TALON TC Series (BACnet) (All versions). Affected devices start sending unsolicited BACnet broadcast messages after processing a specific BACnet createObject request. This could allow an attacker residing in the same BACnet network to send a specially crafted message that results in a partial denial of service condition of the targeted device, and potentially reduce the availability of BACnet network. A power cycle is required to restore the device's normal operation. |
| An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST. |
| When doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously was used to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the subsequent `POST` request. The problem exists in the logic for a reused handle when it is changed from a PUT to a POST. |
| If the PATH environment variable contains paths which are executables (rather than just directories), passing certain strings to LookPath ("", ".", and ".."), can result in the binaries listed in the PATH being unexpectedly returned. |
| An Expected Behavior Violation vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker sending a valid BGP UPDATE packet to cause a BGP session reset, resulting in a Denial of Service (DoS).
Continuous receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
This issue affects iBGP and eBGP and both IPv4 and IPv6 are affected by this vulnerability.
This issue affects Junos OS:
* All versions before 21.2R3-S9,
* from 21.4 before 21.4R3-S11,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S4,
* from 24.2 before 24.2R2,
* from 24.4 before 24.4R1-S3, 24.4R2
Junos OS Evolved:
* All versions before 22.2R3-S7-EVO,
* from 22.4-EVO before 22.4R3-S7-EVO,
* from 23.2-EVO before 23.2R2-S4-EVO,
* from 23.4-EVO before 23.4R2-S4-EVO,
* from 24.2-EVO before 24.2R2-EVO,
* from 24.4-EVO before 24.4R1-S3-EVO, 24.4R2-EVO. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras
The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.
Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace. |
| An Expected Behavior Violation [CWE-440] vulnerability in WatchGuard Fireware OS may allow an attacker to bypass the Fireware OS boot time system integrity check and prevent the Firebox from shutting down in the event of a system integrity check failure. The on-demand system integrity check in the Fireware Web UI will correctly show a failed system integrity check message in the event of a failure.This issue affects Fireware OS: from 12.8.1 through 12.11.4, from 2025.1 through 2025.1.2. |
| In danny-avila/librechat version 0.7.9, there is an insecure API design issue in the 2-Factor Authentication (2FA) flow. The system allows users to disable 2FA without requiring a valid OTP or backup code, bypassing the intended verification process. This vulnerability occurs because the backend does not properly validate the OTP or backup code when the API endpoint '/api/auth/2fa/disable' is directly accessed. This flaw can be exploited by authenticated users to weaken the security of their own accounts, although it does not lead to full account compromise. |
| Inappropriate implementation in Fullscreen in Google Chrome prior to 128.0.6613.84 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| A flaw was found in OpenStack due to an inconsistency between Cinder and Nova. This issue can be triggered intentionally or by accident. A remote, authenticated attacker could exploit this vulnerability by detaching one of their volumes from Cinder. The highest impact is to confidentiality. |
