| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Cisco IP Phones 7902/7905/7912, ATA 186/188, Unity Express, ACNS, and Subscriber Edge Services Manager (SESM) allows remote attackers to cause a denial of service (crash or instability) via a compressed DNS packet with a label length byte with an incorrect offset. |
| The Cisco IP Phone 7940 allows remote attackers to cause a denial of service (reboot) via a large amount of TCP SYN packets (syn flood) to arbitrary ports, as demonstrated to port 80. |
| The Session Initiation Protocol (SIP) implementation in multiple Cisco products including IP Phone models 7940 and 7960, IOS versions in the 12.2 train, and Secure PIX 5.2.9 to 6.2.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted INVITE messages, as demonstrated by the OUSPG PROTOS c07-sip test suite. |
| Cisco 7940/7960 Voice over IP (VoIP) phones do not properly check the Call-ID, branch, and tag values in a NOTIFY message to verify a subscription, which allows remote attackers to spoof messages such as the "Messages waiting" message. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The Wi-Fi implementation does not verify the Message Integrity Check (authenticity) of fragmented TKIP frames. An adversary can abuse this to inject and possibly decrypt packets in WPA or WPA2 networks that support the TKIP data-confidentiality protocol. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The WEP, WPA, WPA2, and WPA3 implementations accept plaintext frames in a protected Wi-Fi network. An adversary can abuse this to inject arbitrary data frames independent of the network configuration. |
| An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients. |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. |
| Multiple vulnerabilities in the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) implementations for Cisco IP Phone Series 68xx/78xx/88xx could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP phone.
These vulnerabilities are due to missing checks when the IP phone processes a Cisco Discovery Protocol or LLDP packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol or LLDP packet to the targeted IP phone. A successful exploit could allow the attacker to execute code on the affected IP phone or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition.Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. |
| A vulnerability in the web-based management interface of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to retrieve sensitive information from an affected device.
This vulnerability is due to a lack of authentication for specific endpoints of the web-based management interface on an affected device. An attacker could exploit this vulnerability by connecting to the affected device. A successful exploit could allow the attacker to gain unauthorized access to the device, enabling the recording of user credentials and traffic to and from the affected device, including VoIP calls that could be replayed. |
| A vulnerability in the web-based management interface of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a DoS condition.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. |
| A vulnerability in the XML service of Cisco IP Phone firmware could allow an unauthenticated, remote attacker to initiate phone calls on an affected device.
This vulnerability exists because bounds-checking does not occur while parsing XML requests. An attacker could exploit this vulnerability by sending a crafted XML request to an affected device. A successful exploit could allow the attacker to initiate calls or play sounds on the device. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device.
This vulnerability is due to improper storage of sensitive information within the web UI of Session Initiation Protocol (SIP)-based phone loads. An attacker could exploit this vulnerability by browsing to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information, including incoming and outgoing call records.
Note: Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 6800, 7800, and 8800 Series, and Cisco Video Phone 8875 with Cisco Multiplatform Firmware could allow an authenticated, remote attacker to conduct stored cross-site scripting (XSS) attacks against users.
This vulnerability exists because the web UI of an affected device does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: To exploit this vulnerability, Web Access must be enabled on the phone and the attacker must have Admin credentials on the device. Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 6800, 7800, and 8800 Series, and Cisco Video Phone 8875 with Cisco Multiplatform Firmware could allow an authenticated, remote attacker to conduct stored cross-site scripting (XSS) attacks against users.
This vulnerability exists because the web UI of an affected device does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: To exploit this vulnerability, Web Access must be enabled on the phone and the attacker must have Admin credentials on the device. Web Access is disabled by default. |
| A vulnerability in the directory permissions of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device.
This vulnerability exists because the product exposes sensitive information to an actor that is not explicitly authorized to have access to that information. An attacker could exploit this vulnerability by sending a crafted packet to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information from the device.
Note: To exploit this vulnerability, Web Access must be enabled on the phone. Web Access is disabled by default. |
| A vulnerability in the directory permissions of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to write arbitrary files on an affected device.
This vulnerability is due to a lack of proper authentication controls. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to perform arbitrary file writes to specific directories in the underlying operating system.
Note: To exploit this vulnerability, Web Access must be enabled on the phone. Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to a buffer overflow when an affected device processes HTTP packets. An attacker could exploit this vulnerability by sending crafted HTTP input to the device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to conduct XSS attacks against a user of the web UI.
This vulnerability exists because the web UI of an affected device does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition. |
