| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Cognos Analytics Mobile (iOS) 1.1.0 through 1.1.22
could be vulnerable to information exposure due to the use of unencrypted network traffic. |
| IBM Engineering Systems Design Rhapsody 9.0.2, 10.0, and 10.0.1 transmits sensitive information without encryption that could allow an attacker to obtain highly sensitive information. |
| IBM Storage Defender 2.0.0 through 2.0.7 on-prem defender-sensor-cmd CLI
could allow a remote attacker to obtain sensitive information, caused by sending network requests over an insecure channel. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. |
| A vulnerability has been identified in RUGGEDCOM i800 (All versions < V4.3.8), RUGGEDCOM i801 (All versions < V4.3.8), RUGGEDCOM i802 (All versions < V4.3.8), RUGGEDCOM i803 (All versions < V4.3.8), RUGGEDCOM M2100 (All versions < V4.3.8), RUGGEDCOM M2200 (All versions < V4.3.8), RUGGEDCOM M969 (All versions < V4.3.8), RUGGEDCOM RMC30 (All versions < V4.3.8), RUGGEDCOM RMC8388 V4.X (All versions < V4.3.8), RUGGEDCOM RMC8388 V5.X (All versions < V5.7.0), RUGGEDCOM RP110 (All versions < V4.3.8), RUGGEDCOM RS1600 (All versions < V4.3.8), RUGGEDCOM RS1600F (All versions < V4.3.8), RUGGEDCOM RS1600T (All versions < V4.3.8), RUGGEDCOM RS400 (All versions < V4.3.8), RUGGEDCOM RS401 (All versions < V4.3.8), RUGGEDCOM RS416 (All versions < V4.3.8), RUGGEDCOM RS416P (All versions < V4.3.8), RUGGEDCOM RS416Pv2 V4.X (All versions < V4.3.8), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.7.0), RUGGEDCOM RS416v2 V4.X (All versions < V4.3.8), RUGGEDCOM RS416v2 V5.X (All versions < V5.7.0), RUGGEDCOM RS8000 (All versions < V4.3.8), RUGGEDCOM RS8000A (All versions < V4.3.8), RUGGEDCOM RS8000H (All versions < V4.3.8), RUGGEDCOM RS8000T (All versions < V4.3.8), RUGGEDCOM RS900 (All versions < V4.3.8), RUGGEDCOM RS900 (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RS900G (All versions < V4.3.8), RUGGEDCOM RS900G (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RS900GP (All versions < V4.3.8), RUGGEDCOM RS900L (All versions < V4.3.8), RUGGEDCOM RS900M-GETS-C01 (All versions < V4.3.8), RUGGEDCOM RS900M-GETS-XX (All versions < V4.3.8), RUGGEDCOM RS900M-STND-C01 (All versions < V4.3.8), RUGGEDCOM RS900M-STND-XX (All versions < V4.3.8), RUGGEDCOM RS900W (All versions < V4.3.8), RUGGEDCOM RS910 (All versions < V4.3.8), RUGGEDCOM RS910L (All versions < V4.3.8), RUGGEDCOM RS910W (All versions < V4.3.8), RUGGEDCOM RS920L (All versions < V4.3.8), RUGGEDCOM RS920W (All versions < V4.3.8), RUGGEDCOM RS930L (All versions < V4.3.8), RUGGEDCOM RS930W (All versions < V4.3.8), RUGGEDCOM RS940G (All versions < V4.3.8), RUGGEDCOM RS969 (All versions < V4.3.8), RUGGEDCOM RSG2100 (All versions < V4.3.8), RUGGEDCOM RSG2100 (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RSG2100P (All versions < V4.3.8), RUGGEDCOM RSG2100P (32M) V4.X (All versions < V4.3.8), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.7.0), RUGGEDCOM RSG2200 (All versions < V4.3.8), RUGGEDCOM RSG2288 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2288 V5.X (All versions < V5.7.0), RUGGEDCOM RSG2300 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2300 V5.X (All versions < V5.7.0), RUGGEDCOM RSG2300P V4.X (All versions < V4.3.8), RUGGEDCOM RSG2300P V5.X (All versions < V5.7.0), RUGGEDCOM RSG2488 V4.X (All versions < V4.3.8), RUGGEDCOM RSG2488 V5.X (All versions < V5.7.0), RUGGEDCOM RSG907R (All versions < V5.7.0), RUGGEDCOM RSG908C (All versions < V5.7.0), RUGGEDCOM RSG909R (All versions < V5.7.0), RUGGEDCOM RSG910C (All versions < V5.7.0), RUGGEDCOM RSG920P V4.X (All versions < V4.3.8), RUGGEDCOM RSG920P V5.X (All versions < V5.7.0), RUGGEDCOM RSL910 (All versions < V5.7.0), RUGGEDCOM RST2228 (All versions < V5.7.0), RUGGEDCOM RST2228P (All versions < V5.7.0), RUGGEDCOM RST916C (All versions < V5.7.0), RUGGEDCOM RST916P (All versions < V5.7.0). The SSH server on affected devices is configured to offer weak ciphers by default.
This could allow an unauthorized attacker in a man-in-the-middle position to read and modify any data passed over the connection between legitimate clients and the affected device. |
| git-annex had a bug in the S3 and Glacier remotes where if embedcreds=yes
was set, and the remote used encryption=pubkey or encryption=hybrid,
the embedded AWS credentials were stored in the git repository
in (effectively) plaintext, not encrypted as they were supposed to be. This issue affects git-annex: from 3.20121126 before 5.20140919. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to obtain sensitive information from an affected device.
This vulnerability is due to a lack of proper data protection mechanisms for certain configuration settings. An attacker with Read-Only Administrator privileges could exploit this vulnerability by browsing to a page that contains sensitive data. A successful exploit could allow the attacker to view device credentials that are normally not visible to Read-Only Administrators. |
| The encrypted subject of an email message could be incorrectly and permanently assigned to an arbitrary other email message in Thunderbird's local cache. Consequently, when replying to the contaminated email message, the user might accidentally leak the confidential subject to a third-party. While this update fixes the bug and avoids future message contamination, it does not automatically repair existing contaminations. Users are advised to use the repair folder functionality, which is available from the context menu of email folders, which will erase incorrect subject assignments. This vulnerability affects Thunderbird < 115.8.1. |
| Medtronic N'Vision Clinician Programmer 8840 N'Vision Clinician Programme and 8870 N'Vision removable Application Card do not encrypt PII and PHI while at rest. |
| WellinTech KingSCADA 3.0 uses a cleartext base64 format for storage of passwords in user.db, which allows context-dependent attackers to obtain sensitive information by reading this file. |
| Missing encryption in the NFC tags of the Flient Smart Door Lock v1.0 allows attackers to create a cloned tag via brief physical proximity to the original tags, which results in an attacker gaining access to the perimeter. |
| 1Panel is an open source Linux server operation and maintenance management panel. The HTTPS cookie that comes with the panel does not have the Secure keyword, which may cause the cookie to be sent in plain text if accessed using HTTP. This issue has been patched in version 1.9.6.
|
| Cryptographic issue in Automotive while unwrapping the key secs2d and verifying with RPMB data. |
| Missing encryption in the RFID tags of the Hozard alarm system (Alarmsysteem) v1.0 allow attackers to create a cloned tag via brief physical proximity to one of the original tags, which results in an attacker being able to bring the alarm system to a disarmed state. |
| Google Nest WiFi Pro root code-execution & user-data compromise |
| NASA AIT-Core v2.5.2 was discovered to use unencrypted channels to exchange data over the network, allowing attackers to execute a man-in-the-middle attack. When chained with CVE-2024-35059, the CVE in subject leads to an unauthenticated, fully remote code execution. |
| Sensitive Cookie in HTTPS Session Without 'Secure' Attribute in GitHub repository ikus060/minarca prior to 4.2.2. |
| Sensitive Cookie in HTTPS Session Without 'Secure' Attribute in GitHub repository ikus060/rdiffweb prior to 2.4.6. |
| Medtronic CareLink and Encore Programmers
do not encrypt or do not sufficiently encrypt sensitive
PII and PHI information while at rest . |
| Missing AES encryption in Corsair K63 Wireless 3.1.3 allows physically proximate attackers to inject and sniff keystrokes via 2.4 GHz radio transmissions. |
| Dashlane password and Keepass Server password in My Account Settings are not encrypted in the database in Devolutions Remote Desktop Manager 2022.2.26 and prior versions and Devolutions Server 2022.3.1 and prior versions which allows database users to read the data.
This issue affects :
Remote Desktop Manager 2022.2.26 and prior versions.
Devolutions Server 2022.3.1 and prior versions.
|
