| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper boundary check in DSP driver prior to SMR Mar-2021 Release 1 allows out of bounds memory access. |
| An incorrect implementation handling file descriptor in dpu driver prior to SMR Mar-2021 Release 1 results in memory corruption leading to kernel panic. |
| A flaw was found in Nodemailer. This vulnerability allows a denial of service (DoS) via a crafted email address header that triggers infinite recursion in the address parser. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ioapic: Handle allocation failures gracefully
Breno observed panics when using failslab under certain conditions during
runtime:
can not alloc irq_pin_list (-1,0,20)
Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed
panic+0x4e9/0x590
mp_irqdomain_alloc+0x9ab/0xa80
irq_domain_alloc_irqs_locked+0x25d/0x8d0
__irq_domain_alloc_irqs+0x80/0x110
mp_map_pin_to_irq+0x645/0x890
acpi_register_gsi_ioapic+0xe6/0x150
hpet_open+0x313/0x480
That's a pointless panic which is a leftover of the historic IO/APIC code
which panic'ed during early boot when the interrupt allocation failed.
The only place which might justify panic is the PIT/HPET timer_check() code
which tries to figure out whether the timer interrupt is delivered through
the IO/APIC. But that code does not require to handle interrupt allocation
failures. If the interrupt cannot be allocated then timer delivery fails
and it either panics due to that or falls back to legacy mode.
Cure this by removing the panic wrapper around __add_pin_to_irq_node() and
making mp_irqdomain_alloc() aware of the failure condition and handle it as
any other failure in this function gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON on ENOMEM from btrfs_lookup_extent_info() in walk_down_proc()
We handle errors here properly, ENOMEM isn't fatal, return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
The lookup function iwl_mvm_rcu_fw_link_id_to_link_conf() is
normally called with input from the firmware, so it should use
IWL_FW_CHECK() instead of WARN_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle errors from btrfs_dec_ref() properly
In walk_up_proc() we BUG_ON(ret) from btrfs_dec_ref(). This is
incorrect, we have proper error handling here, return the error. |
| Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.1.5 and 1.0.2, there is a nil pointer dereference vulnerability in the Omni Resource Service allows unauthenticated users to cause a server panic and denial of service by sending empty create/update resource requests through the API endpoints. The vulnerability exists in the isSensitiveSpec function which calls grpcomni.CreateResource without checking if the resource's metadata field is nil. When a resource is created with an empty Metadata field, the CreateResource function attempts to access resource.Metadata.Version causing a segmentation fault. This vulnerability is fixed in 1.1.5 and 1.0.2. |
| KubeVirt is a virtual machine management add-on for Kubernetes. Prior to 1.7.0-beta.0, a logic flaw in the virt-controller allows an attacker to disrupt the control over a running VMI by creating a pod with the same labels as the legitimate virt-launcher pod associated with the VMI. This can mislead the virt-controller into associating the fake pod with the VMI, resulting in incorrect status updates and potentially causing a DoS (Denial-of-Service). This vulnerability is fixed in 1.7.0-beta.0. |
| FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.11, when handling DTLS-SRTP for media setup, FreeSWITCH is susceptible to Denial of Service due to a race condition in the hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. If an attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to the port on the FreeSWITCH server that is expecting packets from the caller, a DTLS error is generated. This results in the media session being torn down, which is followed by teardown at signaling (SIP) level too. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable FreeSWITCH servers for calls that rely on DTLS-SRTP. To address this vulnerability, upgrade FreeSWITCH to 1.10.11 which includes the security fix. The solution implemented is to drop all packets from addresses that have not been validated by an ICE check. |
| S-Lang 2.3.2 was discovered to contain an arithmetic exception via the function tt_sprintf(). |
| Improper check of password character lenght in ORing IAP-420 allows a forced deadlock. This issue affects IAP-420: through 2.01e. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ar0521: Use cansleep version of gpiod_set_value()
If we use GPIO reset from I2C port expander, we must use *_cansleep()
variant of GPIO functions.
This was not done in ar0521_power_on()/ar0521_power_off() functions.
Let's fix that.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c
Modules linked in:
CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : gpiod_set_value+0x74/0x7c
lr : ar0521_power_on+0xcc/0x290
sp : ffffff8001d7ab70
x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000
x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088
x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088
x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80
x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000
x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930
x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0
x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780
x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
gpiod_set_value+0x74/0x7c
ar0521_power_on+0xcc/0x290
... |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix state management in error path of log writing function
After commit a694291a6211 ("nilfs2: separate wait function from
nilfs_segctor_write") was applied, the log writing function
nilfs_segctor_do_construct() was able to issue I/O requests continuously
even if user data blocks were split into multiple logs across segments,
but two potential flaws were introduced in its error handling.
First, if nilfs_segctor_begin_construction() fails while creating the
second or subsequent logs, the log writing function returns without
calling nilfs_segctor_abort_construction(), so the writeback flag set on
pages/folios will remain uncleared. This causes page cache operations to
hang waiting for the writeback flag. For example,
truncate_inode_pages_final(), which is called via nilfs_evict_inode() when
an inode is evicted from memory, will hang.
Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared.
As a result, if the next log write involves checkpoint creation, that's
fine, but if a partial log write is performed that does not, inodes with
NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files"
list, and their data and b-tree blocks may not be written to the device,
corrupting the block mapping.
Fix these issues by uniformly calling nilfs_segctor_abort_construction()
on failure of each step in the loop in nilfs_segctor_do_construct(),
having it clean up logs and segment usages according to progress, and
correcting the conditions for calling nilfs_redirty_inodes() to ensure
that the NILFS_I_COLLECTED flag is cleared. |
| printer_write in drivers/usb/gadget/function/f_printer.c in the Linux kernel through 6.7.4 does not properly call usb_ep_queue, which might allow attackers to cause a denial of service or have unspecified other impact. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for
PADATA_RESET"), the pcrypt encryption and decryption operations return
-EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is
generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns
-EAGAIN, the unnecessary panic will occur when panic_on_warn set 1.
Fix this issue by calling crypto layer directly without parallelization
in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: Prevent creation of classes with TC_H_ROOT
The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination
condition when traversing up the qdisc tree to update parent backlog
counters. However, if a class is created with classid TC_H_ROOT, the
traversal terminates prematurely at this class instead of reaching the
actual root qdisc, causing parent statistics to be incorrectly maintained.
In case of DRR, this could lead to a crash as reported by Mingi Cho.
Prevent the creation of any Qdisc class with classid TC_H_ROOT
(0xFFFFFFFF) across all qdisc types, as suggested by Jamal. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memory-failure: update ttu flag inside unmap_poisoned_folio
Patch series "mm: memory_failure: unmap poisoned folio during migrate
properly", v3.
Fix two bugs during folio migration if the folio is poisoned.
This patch (of 3):
Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to
TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in
order to stop send SIGBUS signal when accessing an error page after a
memory error on a clean folio. However during page migration, anon folio
must be set with TTU_HWPOISON during unmap_*(). For pagecache we need
some policy just like the one in hwpoison_user_mappings to set this flag.
So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to
handle this warning properly.
Warning will be produced during unamp poison folio with the following log:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c
Modules linked in:
CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42
Tainted: [W]=WARN
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : try_to_unmap_one+0x8fc/0xd3c
lr : try_to_unmap_one+0x3dc/0xd3c
Call trace:
try_to_unmap_one+0x8fc/0xd3c (P)
try_to_unmap_one+0x3dc/0xd3c (L)
rmap_walk_anon+0xdc/0x1f8
rmap_walk+0x3c/0x58
try_to_unmap+0x88/0x90
unmap_poisoned_folio+0x30/0xa8
do_migrate_range+0x4a0/0x568
offline_pages+0x5a4/0x670
memory_block_action+0x17c/0x374
memory_subsys_offline+0x3c/0x78
device_offline+0xa4/0xd0
state_store+0x8c/0xf0
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x44/0x54
kernfs_fop_write_iter+0x118/0x1a8
vfs_write+0x3a8/0x4bc
ksys_write+0x6c/0xf8
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x44/0x100
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0xc8/0xcc
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
[mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe] |
| An improper check or handling of exceptional conditions in NPU driver prior to SMR Jan-2022 Release 1 allows arbitrary memory write and code execution. |
| HCL Unica Centralized Offer Management is vulnerable to poor unhandled exceptions which exposes sensitive information. An attacker can exploit use this information to exploit known vulnerabilities launch targeted attacks, such as remote code execution or denial of service. |
