| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE
When installing an emulated MMIO SPTE, do so *after* dropping/zapping the
existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was
right about it being impossible to convert a shadow-present SPTE to an
MMIO SPTE due to a _guest_ write, it failed to account for writes to guest
memory that are outside the scope of KVM.
E.g. if host userspace modifies a shadowed gPTE to switch from a memslot
to emulted MMIO and then the guest hits a relevant page fault, KVM will
install the MMIO SPTE without first zapping the shadow-present SPTE.
------------[ cut here ]------------
is_shadow_present_pte(*sptep)
WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292
Modules linked in: kvm_intel kvm irqbypass
CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm]
Call Trace:
<TASK>
mmu_set_spte+0x237/0x440 [kvm]
ept_page_fault+0x535/0x7f0 [kvm]
kvm_mmu_do_page_fault+0xee/0x1f0 [kvm]
kvm_mmu_page_fault+0x8d/0x620 [kvm]
vmx_handle_exit+0x18c/0x5a0 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0x730
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47fa3f
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix dangling pointer in krb_authenticate
krb_authenticate frees sess->user and does not set the pointer
to NULL. It calls ksmbd_krb5_authenticate to reinitialise
sess->user but that function may return without doing so. If
that happens then smb2_sess_setup, which calls krb_authenticate,
will be accessing free'd memory when it later uses sess->user. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Fix use-after free in init error and remove paths
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use expect->helper
Use expect->helper in ctnetlink and /proc to dump the helper name.
Using nfct_help() without holding a reference to the master conntrack
is unsafe.
Use exp->master->helper in ctnetlink path if userspace does not provide
an explicit helper when creating an expectation to retain the existing
behaviour. The ctnetlink expectation path holds the reference on the
master conntrack and nf_conntrack_expect lock and the nfnetlink glue
path refers to the master ct that is attached to the skb. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1 and below contain a Use After Free vulnerability in the CIccXform::Create() function, where it deletes the hint. This issue is fixed in version 2.3.1.1. |
| Use after free in Windows Kernel-Mode Drivers allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Management Services allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Win32K - ICOMP allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Win32K - ICOMP allows an authorized attacker to elevate privileges locally. |
| Substance3D - Stager versions 3.1.5 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, a race condition between the RDPGFX dynamic virtual channel thread and the SDL render thread leads to a heap use-after-free. Specifically, an escaped pointer to sdl->primary (SDL_Surface) is accessed after it has been freed during RDPGFX ResetGraphics handling. This vulnerability is fixed in 3.20.1. |
| A Use After Free vulnerability was identified in the 802.1X authentication daemon (dot1xd) of Juniper Networks Junos OS and Junos OS Evolved that could allow an authenticated, network-adjacent attacker flapping a port to crash the dot1xd process, leading to a Denial of Service (DoS), or potentially execute arbitrary code within the context of the process running as root.
The issue is specific to the processing of a change in authorization (CoA) when a port bounce occurs. A pointer is freed but was then referenced later in the same code path. Successful exploitation is outside the attacker's direct control due to the specific timing of the two events required to execute the vulnerable code path.
This issue affects systems with 802.1X authentication port-based network access control (PNAC) enabled.
This issue affects:
Junos OS:
* from 23.2R2-S1 before 23.2R2-S5,
* from 23.4R2 before 23.4R2-S6,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2-S1,
* from 25.2 before 25.2R1-S2, 25.2R2;
Junos OS Evolved:
* from 23.2R2-S1 before 23.2R2-S5-EVO,
* from 23.4R2 before 23.4R2-S6-EVO,
* from 24.2 before 24.2R2-S3-EVO,
* from 24.4 before 24.4R2-S1-EVO,
* from 25.2 before 25.2R1-S2-EVO, 25.2R2-EVO. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, `xf_Pointer_New` frees `cursorPixels` on failure, then `pointer_free` calls `xf_Pointer_Free` and frees it again, triggering ASan UAF. A malicious server can trigger a client‑side use after free, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to version 3.21.0, offscreen bitmap deletion leaves `gdi->drawing` pointing to freed memory, causing UAF when related update packets arrive. A malicious server can trigger a client‑side use after free, causing a crash (DoS) and potential heap corruption with code‑execution risk depending on allocator behavior and surrounding heap layout. Version 3.21.0 contains a patch for the issue. |
| Use after free in ANGLE in Google Chrome prior to 144.0.7559.59 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Low) |
| ALGO 8180 IP Audio Alerter SIP Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ALGO 8180 IP Audio Alerter devices. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of SIP calls. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the device. Was ZDI-CAN-28303. |
| In the Linux kernel, the following vulnerability has been resolved:
macvlan: fix possible UAF in macvlan_forward_source()
Add RCU protection on (struct macvlan_source_entry)->vlan.
Whenever macvlan_hash_del_source() is called, we must clear
entry->vlan pointer before RCU grace period starts.
This allows macvlan_forward_source() to skip over
entries queued for freeing.
Note that macvlan_dev are already RCU protected, as they
are embedded in a standard netdev (netdev_priv(ndev)).
https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u |
