| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| On the exos 9300 server, a SOAP API is reachable on port 8002. This API does not require any authentication prior to sending requests. Therefore, network access to the exos server allows e.g. the creation of arbitrary access log events as well as querying the 2FA PINs associated with the enrolled chip cards. |
| CNCF K3s 1.32 before 1.32.4-rc1+k3s1 has a Kubernetes kubelet configuration change with the unintended consequence that, in some situations, ReadOnlyPort is set to 10255. For example, the default behavior of a K3s online installation might allow unauthenticated access to this port, exposing credentials. |
| Zipkin through 3.5.1 has a /heapdump endpoint (associated with the use of Spring Boot Actuator), a similar issue to CVE-2025-48927. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau 0.9.x derives numeric GIDs for Entra ID groups from the group display name when himmelblau.conf `id_attr_map = name` (the default configuration). Because Microsoft Entra ID allows multiple groups with the same `displayName` (including end-user–created personal/O365 groups, depending on tenant policy), distinct directory groups can collapse to the same numeric GID on Linux. This issue only applies to Himmelblau versions 0.9.0 through 0.9.22. Any resource or service on a Himmelblau-joined host that enforces authorization by numeric GID (files/dirs, etc.) can be unintentionally accessible to a user who creates or joins a different Entra/O365 group that happens to share the same `displayName` as a privileged security group. Users should upgrade to 0.9.23, or 1.0.0 or later, to receive a patch. Group to GID mapping now uses Entra ID object IDs (GUIDs) and does not collide on same-name groups. As a workaround, use tenant policy hardening to restrict arbitrary group creation until all hosts are patched. |
| OpenPLC_V3 is vulnerable to an Initialization of a Resource with an Insecure Default vulnerability which could allow an attacker to gain access to the system by bypassing authentication via an API. |
| Budibase is an open-source low-code platform. Prior to version 3.33.4, a server-side request forgery (SSRF) vulnerability exists in Budibase's REST datasource connector. The platform's SSRF protection mechanism (IP blacklist) is rendered completely ineffective because the BLACKLIST_IPS environment variable is not set by default in any of the official deployment configurations. When this variable is empty, the blacklist function unconditionally returns false, allowing all requests through without restriction. This issue has been patched in version 3.33.4. |
| NVIDIA Jetson for JetPack contains a vulnerability in the system initialization logic, where an unprivileged attacker could cause the initialization of a resource with an insecure default. A successful exploit of this vulnerability might lead to information disclosure of encrypted data, data tampering, and partial denial of service across devices sharing the same machine ID. |
| The Go MCP SDK used Go's standard encoding/json. Prior to version 1.4.0, the Model Context Protocol (MCP) Go SDK does not enable DNS rebinding protection by default for HTTP-based servers. When an HTTP-based MCP server is run on localhost without authentication with StreamableHTTPHandler or SSEHandler, a malicious website could exploit DNS rebinding to bypass same-origin policy restrictions and send requests to the local MCP server. This could allow an attacker to invoke tools or access resources exposed by the MCP server on behalf of the user in those limited circumstances. This issue has been patched in version 1.4.0. |
| OpenClaw versions prior to 2026.2.21 contain an improper sandbox configuration vulnerability that allows attackers to execute arbitrary code by exploiting renderer-side vulnerabilities without requiring a sandbox escape. Attackers can leverage the disabled OS-level sandbox protections in the Chromium browser container to achieve code execution on the host system. |
| WWBN AVideo is an open source video platform. In versions 25.0 and below, the official Docker deployment files (docker-compose.yml, env.example) ship with the admin password set to "password", which is automatically used to seed the admin account during installation, meaning any instance deployed without overriding SYSTEM_ADMIN_PASSWORD is immediately vulnerable to trivial administrative takeover. No compensating controls exist: there is no forced password change on first login, no complexity validation, no default-password detection, and the password is hashed with weak MD5. Full admin access enables user data exposure, content manipulation, and potential remote code execution via file uploads and plugin management. The same insecure-default pattern extends to database credentials (avideo/avideo), compounding the risk. Exploitation depends on operators failing to change the default, a condition likely met in quick-start, demo, and automated deployments. This issue has been fixed in version 26.0. |
| FileRise is a self-hosted web file manager / WebDAV server. In versions prior to 3.9.0, a hardcoded default encryption key (default_please_change_this_key) is used for all cryptographic operations — HMAC token generation, AES config encryption, and session tokens — allowing any unauthenticated attacker to forge upload tokens for arbitrary file upload to shared folders, and to decrypt admin configuration secrets including OIDC client secrets and SMTP passwords. FileRise uses a single key (PERSISTENT_TOKENS_KEY) for all crypto operations. The default value default_please_change_this_key is hardcoded in two places and used unless the deployer explicitly overrides the environment variable. This issue is fixed in version 3.9.0. |
| Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2. |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. In 1.11.1 and earlier, On default installations where no password or API key has been configured, all HTTP endpoints and the agent WebSocket lack authentication, and the server's CORS policy accepts any origin. AnythingLLM Desktop binds to 127.0.0.1 (loopback) by default. Modern browsers (Chrome, Edge, Firefox) implement Private Network Access (PNA). This explicitly blocks public websites from making requests to local IP addresses. Exploitation is only viable from within the same local network (LAN) due to browser-level blocking of public-to-private requests. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 3.0.0 to before 3.1.0, if Himmelblau is deployed without a configured tenant domain in himmelblau.conf, authentication is not tenant-scoped. In this mode, Himmelblau can accept authentication attempts for arbitrary Entra ID domains by dynamically registering providers at runtime. This behavior is intended for initial/local bootstrap scenarios, but it can create risk in remote authentication environments. This vulnerability is fixed in 3.1.0. |
| MCP TypeScript SDK is the official TypeScript SDK for Model Context Protocol servers and clients. Prior to 1.24.0, The Model Context Protocol (MCP) TypeScript SDK does not enable DNS rebinding protection by default for HTTP-based servers. When an HTTP-based MCP server is run on localhost without authentication with StreamableHTTPServerTransport or SSEServerTransport and has not enabled enableDnsRebindingProtection, a malicious website could exploit DNS rebinding to bypass same-origin policy restrictions and send requests to the local MCP server. This could allow an attacker to invoke tools or access resources exposed by the MCP server on behalf of the user in those limited circumstances. Note that running HTTP-based MCP servers locally without authentication is not recommended per MCP security best practices. This issue does not affect servers using stdio transport. This vulnerability is fixed in 1.24.0. |
| The MCP Python SDK, called `mcp` on PyPI, is a Python implementation of the Model Context Protocol (MCP). Prior to version 1.23.0, tThe Model Context Protocol (MCP) Python SDK does not enable DNS rebinding protection by default for HTTP-based servers. When an HTTP-based MCP server is run on localhost without authentication using FastMCP with streamable HTTP or SSE transport, and has not configured TransportSecuritySettings, a malicious website could exploit DNS rebinding to bypass same-origin policy restrictions and send requests to the local MCP server. This could allow an attacker to invoke tools or access resources exposed by the MCP server on behalf of the user in those limited circumstances. Note that running HTTP-based MCP servers locally without authentication is not recommended per MCP security best practices. This issue does not affect servers using stdio transport. This vulnerability is fixed in 1.23.0. |
| The TeleMessage service through 2025-05-05 configures Spring Boot Actuator with an exposed heap dump endpoint at a /heapdump URI, as exploited in the wild in May 2025. |
| IBM Fusion 2.2.0 through 2.10.1, IBM Fusion HCI 2.2.0 through 2.10.0, and IBM Fusion HCI for watsonx 2.8.2 through 2.10.0 uses insecure default configurations that could expose AMQStreams without client authentication that could allow an attacker to perform unauthorized actions. |
| In findAvailRecognizer of VoiceInteractionManagerService.java, there is a possible way to become the default speech recognizer app due to an insecure default value. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Unitronics VisiLogic before version 9.9.00, used in Vision and Samba PLCs and HMIs, uses a default administrative password. An unauthenticated attacker with network access can take administrative control of a vulnerable system. |
