| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, exposes an HTTP server over the LAN interface of affected devices. This interface is vulnerable to unauthenticated arbitrary command injection through the funjsq_access_token parameter. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, does not properly validate TLS certificates when downloading update packages through its auto-update mechanism. An attacker (suitably positioned on the network) could intercept the update request and deliver a malicious update package in order to gain arbitrary code execution on affected devices. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86. |
| Improper certificate
validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream
AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band
WiFi 6E Router) allows attackers with the ability to intercept and
tamper traffic destined to the device to execute arbitrary commands on the
device.
Devices
with automatic updates enabled may already have this patch applied. If not,
please check the firmware version and update to the
latest.
Fixed in:
RAX30 firmware
1.0.14.108 or later.
RAXE300 firmware
1.0.9.82 or later |
| Improper input validation
in NETGEAR DGN2200v4 (N300 Wireless ADSL2+ Modem Router) allows attackers with
direct network access to the device to potentially execute code on the device.
Please check the firmware version and update to the latest.
Fixed
in:
DGN2200v4
firmware 1.0.0.132 or later |
| A vulnerability in the speedtest feature of affected NETGEAR Nighthawk routers, caused by improper input validation, can allow attackers on the router's WAN side, using attacker-in-the-middle techniques (MiTM) to manipulate DNS responses and execute commands when speedtests are run.
This issue affects RS700: through 1.0.7.82; RAX54Sv2 : before V1.1.6.36; RAX41v2: before V1.1.6.36; RAX50: before V1.2.14.114; RAXE500: before V1.2.14.114; RAX41: before V1.0.17.142; RAX43: before V1.0.17.142; RAX35v2: before V1.0.17.142; RAXE450: before V1.2.14.114; RAX43v2: before V1.1.6.36; RAX42: before V1.0.17.142; RAX45: before V1.0.17.142; RAX50v2: before V1.1.6.36; MR90: before V1.0.2.46; MS90: before V1.0.2.46; RAX42v2: before V1.1.6.36; RAX49S: before V1.1.6.36. |
| An issue in Netgear DGN1000WW v.1.1.00.45 allows a remote attacker to execute arbitrary code via the Diagnostics page |
| Denial of Service Vulnerability in NETGEAR C6220 and C6230 (DOCSIS® 3.0 Two-in-one Cable Modem + WiFi Router) allows authenticated local WiFi users reboot the router. |
| A vulnerability in NETGEAR Nighthawk R7000P routers lets an authenticated admin execute OS command injections due to improper input validation.
This issue affects R7000P: through 1.3.3.154. |
| dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077. |
| Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the iface parameter in the action_bandwidth function. |
| In Netgear RAX30 V1.0.10.94_3, the USERLIMIT_GLOBAL option is set to 0 in multiple bftpd-related configuration files. This can cause DoS attacks when unlimited users are connected. |
| Netgear EX8000 V1.0.0.126 was discovered to contain a command injection vulnerability via the switch_status function. |
| Login credentials are inadvertently recorded in logs if a Syslog Server is configured in NETGEAR WAX610
and WAX610Y (AX1800 Dual Band PoE Multi-Gig Insight Managed WiFi 6
Access Points). An user having access to the syslog server can read the logs containing these credentials.
This issue affects WAX610: before 10.8.11.4; WAX610Y: before 10.8.11.4.
Devices
managed with Insight get automatic updates. If not, please check the firmware version
and update to the latest.
Fixed in:
WAX610 firmware
11.8.0.10 or later.
WAX610Y firmware
11.8.0.10 or later. |
| A vulnerability classified as problematic was found in Netgear DG834Gv5 1.6.01.34. This vulnerability affects unknown code of the component Web Management Interface. The manipulation leads to cleartext storage of sensitive information. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-262126 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| NETGEAR JGS516PE devices before 2.6.0.43 are affected by lack of access control at the function level. |
| A stack-based buffer overflow vulnerability exists in the JSON Parsing getblockschedule() functionality of Netgear RAX30 1.0.11.96 and 1.0.7.78. A specially crafted HTTP request can lead to code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. |
| NETGEAR WNR2000v3 devices before 1.1.2.14, WNR2000v4 devices before 1.0.0.66, and WNR2000v5 devices before 1.0.0.42 allow authentication bypass and remote code execution via a buffer overflow that uses a parameter in the administration webapp. The NETGEAR ID is PSV-2016-0261. |
| ping.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ping_IPAddr field of an HTTP POST request. |
