| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability has been identified in the libarchive library. This flaw can lead to a heap buffer over-read due to the size of a filter block potentially exceeding the Lempel-Ziv-Storer-Schieber (LZSS) window. This means the library may attempt to read beyond the allocated memory buffer, which can result in unpredictable program behavior, crashes (denial of service), or the disclosure of sensitive information from adjacent memory regions. |
| A flaw was found in the SFTP server message decoding logic of libssh. The issue occurs due to an incorrect packet length check that allows an integer overflow when handling large payload sizes on 32-bit systems. This issue leads to failed memory allocation and causes the server process to crash, resulting in a denial of service. |
| A flaw was found in the key export functionality of libssh. The issue occurs in the internal function responsible for converting cryptographic keys into serialized formats. During error handling, a memory structure is freed but not cleared, leading to a potential double free issue if an additional failure occurs later in the function. This condition may result in heap corruption or application instability in low-memory scenarios, posing a risk to system reliability where key export operations are performed. |
| When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections. |
| When reading data from disk, the grub's UDF filesystem module utilizes the user controlled data length metadata to allocate its internal buffers. In certain scenarios, while iterating through disk sectors, it assumes the read size from the disk is always smaller than the allocated buffer size which is not guaranteed. A crafted filesystem image may lead to a heap-based buffer overflow resulting in critical data to be corrupted, resulting in the risk of arbitrary code execution by-passing secure boot protections. |
| A vulnerability has been identified in the libarchive library. This flaw can be triggered when file streams are piped into bsdtar, potentially allowing for reading past the end of the file. This out-of-bounds read can lead to unintended consequences, including unpredictable program behavior, memory corruption, or a denial-of-service condition. |
| A vulnerability has been identified in the libarchive library. This flaw involves an integer overflow that can be triggered when processing a Web Archive (WARC) file that claims to have more than INT64_MAX - 4 content bytes. An attacker could craft a malicious WARC archive to induce this overflow, potentially leading to unpredictable program behavior, memory corruption, or a denial-of-service condition within applications that process such archives using libarchive. This bug affects libarchive versions prior to 3.8.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against the sizeof() of each descriptor type.
OTOH, the clock selector descriptor of UAC2 and UAC3 has an array
of bNrInPins elements and two more fields at its tail, hence those
have to be checked in addition to the sizeof() check. |
| A vulnerability was found in SQLite SQLite3 up to 3.43.0 and classified as critical. This issue affects the function sessionReadRecord of the file ext/session/sqlite3session.c of the component make alltest Handler. The manipulation leads to heap-based buffer overflow. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-248999. |
| In ssh in OpenSSH before 9.6, OS command injection might occur if a user name or host name has shell metacharacters, and this name is referenced by an expansion token in certain situations. For example, an untrusted Git repository can have a submodule with shell metacharacters in a user name or host name. |
| Express.js minimalist web framework for node. Versions of Express.js prior to 4.19.0 and all pre-release alpha and beta versions of 5.0 are affected by an open redirect vulnerability using malformed URLs. When a user of Express performs a redirect using a user-provided URL Express performs an encode [using `encodeurl`](https://github.com/pillarjs/encodeurl) on the contents before passing it to the `location` header. This can cause malformed URLs to be evaluated in unexpected ways by common redirect allow list implementations in Express applications, leading to an Open Redirect via bypass of a properly implemented allow list. The main method impacted is `res.location()` but this is also called from within `res.redirect()`. The vulnerability is fixed in 4.19.2 and 5.0.0-beta.3. |
| The email module of Python through 3.11.3 incorrectly parses e-mail addresses that contain a special character. The wrong portion of an RFC2822 header is identified as the value of the addr-spec. In some applications, an attacker can bypass a protection mechanism in which application access is granted only after verifying receipt of e-mail to a specific domain (e.g., only @company.example.com addresses may be used for signup). This occurs in email/_parseaddr.py in recent versions of Python. |
| xmlSchemaPreRun in xmlschemas.c in libxml2 2.9.10 allows an xmlSchemaValidateStream memory leak. |
| Anyscale Ray 2.6.3 and 2.8.0 allows a remote attacker to execute arbitrary code via the job submission API. NOTE: the vendor's position is that this report is irrelevant because Ray, as stated in its documentation, is not intended for use outside of a strictly controlled network environment. (Also, within that environment, customers at version 2.52.0 and later can choose to use token authentication.) |
| runc through 1.1.4 has Incorrect Access Control leading to Escalation of Privileges, related to libcontainer/rootfs_linux.go. To exploit this, an attacker must be able to spawn two containers with custom volume-mount configurations, and be able to run custom images. NOTE: this issue exists because of a CVE-2019-19921 regression. |
| node-tar is a Tar for Node.js. node-tar prior to version 6.2.1 has no limit on the number of sub-folders created in the folder creation process. An attacker who generates a large number of sub-folders can consume memory on the system running node-tar and even crash the Node.js client within few seconds of running it using a path with too many sub-folders inside. Version 6.2.1 fixes this issue by preventing extraction in excessively deep sub-folders. |
| Prior to versions 7.1.0, 6.1.2, and 5.3.4, the webpack-dev-middleware development middleware for devpack does not validate the supplied URL address sufficiently before returning the local file. It is possible to access any file on the developer's machine. The middleware can either work with the physical filesystem when reading the files or it can use a virtualized in-memory `memfs` filesystem. If `writeToDisk` configuration option is set to `true`, the physical filesystem is used. The `getFilenameFromUrl` method is used to parse URL and build the local file path. The public path prefix is stripped from the URL, and the `unsecaped` path suffix is appended to the `outputPath`. As the URL is not unescaped and normalized automatically before calling the midlleware, it is possible to use `%2e` and `%2f` sequences to perform path traversal attack.
Developers using `webpack-dev-server` or `webpack-dev-middleware` are affected by the issue. When the project is started, an attacker might access any file on the developer's machine and exfiltrate the content. If the development server is listening on a public IP address (or `0.0.0.0`), an attacker on the local network can access the local files without any interaction from the victim (direct connection to the port). If the server allows access from third-party domains, an attacker can send a malicious link to the victim. When visited, the client side script can connect to the local server and exfiltrate the local files. Starting with fixed versions 7.1.0, 6.1.2, and 5.3.4, the URL is unescaped and normalized before any further processing. |
| A vulnerability was found in Red Hat OpenShift Jenkins. The bearer token is not obfuscated in the logs and potentially carries a high risk if those logs are centralized when collected. The token is typically valid for one year. This flaw allows a malicious user to jeopardize the environment if they have access to sensitive information. |
| pgx is a PostgreSQL driver and toolkit for Go. Prior to version 4.18.2, SQL injection can occur when all of the following conditions are met: the non-default simple protocol is used; a placeholder for a numeric value must be immediately preceded by a minus; there must be a second placeholder for a string value after the first placeholder; both must be on the same line; and both parameter values must be user-controlled. The problem is resolved in v4.18.2. As a workaround, do not use the simple protocol or do not place a minus directly before a placeholder.
|
| A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period. |
